Click here to
download the Mega Fog Brochure
Flexible Atomization Line Detail &
Specification
Manufactured
from 1/4" ID - 1/2" OD UV resistant thermoplastic hydraulic
hose with a burst pressure of 4500 PSI
Atomization nozzle barbs are hydraulically crimped into the hoses
at the factory
Nozzles are mounted and spaced at regular intervals, special
centering is available.
Atomization nozzles produce 10-micron fog droplets.
An antidrip mechanism prevents dripping and water damage.
The flow rate of each nozzle is 0.022 GPM at 1000 PSI.
Each nozzle has a 0.008" orifice.
Pressure tested to 2000PSI prior to shipment.
Standard
Pump Module Detail & Specification
800 to 1200 PSI
operating pressure to create 10 micron sized fluid droplets.
Inlet water solenoid valve to shut off water supply to pump when
not in operation.
10 & 5 Micron Inlet Water Filters.
CAT triplex plunger pump head 2000 PSI pressure rated with large
oil capacity.
Inlet and outlet water pressure gauge to record water pressure at
pump module at all times.
Pressure regulator, adjusts pressure from 0 to 1200 PSI
External thermally protected by pass loop. cools & circulates
unused pressurized water, drains overheated water if required
Baldor or WEG TEFC motor, continuous duty rated.
22mm Pilot lights / Fault Lights for power supply, system
operation, motor overload and low inlet water pressure
Reset buttons for motor overload and low inlet water pressure
ON/OFF/AUTO Operator switch for system operation
Flush mounted hour meter
Liquid tight conduit and cord connections
Industrial
Pump Module Details & Specification
Industrial
Pump Module Package Layout
Each Industrial
Pump Module Package includes a pump module, wall mount water filter
and treatment assembly and a wall mount motor starter
panel.
Filter
Assembly / Water Treatment Details:
Triple Water
Filtration – 50, 10 & 5 micron inlet water filters remove
sediment and particulate matter from inlet water supply.
Large High Capacity Filters – maximizes filter life and
minimizes servicing requirements
Specialized X-scale Inlet Water Conditioner – adjusts the TDS
content of inlet water to minimize nozzle maintenance, requires no
servicing or maintenance.
Electrical Enclosure – Nema 4x and IP66 approved electrical
junction box with terminal strips with liquid tight conduit &
cord connections.
Filter Assembly includes a heavy duty 1/4” thick bracket that
will not flex or bend
Starter
Panel Details:
Nema 4/12/13,
IEC 60529 & IP66 rated metal electrical enclosure with lockable
enclosure door handle
3 Pole, 30AMP electrical power supply disconnect safety
switch
22mm Pilot lights for power supply, control circuit and system
operation
22mm Fault lights for motor overload and low inlet water
pressure
Reset buttons for motor overload and low inlet water pressure
ON/OFF/AUTO Operator switch for system operation
Separate ON/OFF operator switch for chemical metering pump
Flush mounted adjustable countdown timer for air purge
mechanism
Flush mounted hour meter
Numbered terminal strip
Liquid tight conduit and cord connections
Industrial Pump Module Details:
800 to 1200 PSI
operating pressure to create 10 micron sized fluid droplets.
Inlet water solenoid valve to shut off water supply to pump when
not in operation.
CAT triplex plunger pump head 2000 PSI pressure rated with large
oil capacity.
Inlet and outlet water pressure gauge to record water pressure at
pump module at all times.
Pressure regulator. adjusts pressure from 0 to 1200 PSI
External thermally protected by pass loop. cools & circulates
unused pressurized water, drains overheated water if required
Baldor or WEG TEFC motor, continuous duty rated.
Nema 4/12/13, IEC 60529 & IP66 rated electrical enclosure with
numbered terminal strip with Liquid tight conduit and cord
fittings
Low pressure switch for low inlet water pressure protection –
manual reset.
Vibration damped 303 stainless steel frames with stainless steel
weather cover.
