Click here to
download the Mega Fog Brochure
Flexible
Atomization Line
Piian flexible
atomization line uses ¼" I.D. high pressure UV resistant
thermoplastic hydraulic hose.
Atomization nozzles are factory mounted into hydraulic hoses using
a swage type connection.
Nozzles are mounted and spaced at regular intervals, special
centering is available.
Flexible fog lines permit quick and simple installation, even in
hard to reach areas.
Fog line is attached to structures or equipment using hose clamps
or aircraft cable and cable ties.
Atomization nozzles produce 10-micron fog droplets.
Each nozzle is 360o
adjustable.
An antidrip mechanism prevents dripping and water damage.
The flow rate of each nozzle is 0.022 GPM at 1000 PSI.
Each nozzle has a 0.008" orifice.
Pressure tested to 2000PSI before shipment.
Reusable hose fittings are used to make hose connections
Each fitting has standard pipe threads
Ordinary wrenches are used to make field connections
Each system is shipped fully assembled except for final site
connections
Nozzle clusters include 3 or 6 nozzles
arranged in radial fashion.
Clusters are used for spot treatment.
Automatic Drain Valve drains residual fluid from system upon shut
down.
Pump
Modules
Piian Systems
offer two pump module specifications:
Standard
Duty Pump Modules are a lower
cost, lower specification alternative to a full industrial pump
module package. They include a 1000PSI high pressure pump, 10 and 5
micron water filters and a built in electric starter
panel.
Industrial
Duty Pump Modules are designed for
more intensive use that standard duty pump modules, they include a
1000PSI high pressure pump plus a wall mount starter panel and a
wall mount water filter assembly. In addition to their ability to
operate for sustained durations, our Industrial Duty Pump Modules
include three maintenance reducing features:
1. High Capacity Water Filtration - To maximize filter change
intervals.
2. Automatic Air Purge Function - The pump module can be connected
to a compressed air supply which activates on each shut down to
blow moisture out of the system, this reduces nozzle maintenance
and provides some freeze protection.
3. Water Treatment - An X-Scale water conditioner is included as
standard, the X-Scale conditioner adjusts the TDS content of hard
water and reduces calcification of nozzles and therefore nozzle
maintenance.
Standard
Pump Modules
Standard pump
modules include a 1000PSI high pressure pump, 10 and 5 micron water
filters and a built in electric starter panel. The high pressure
pump module filters then pressurizes water to 1000 PSI / 70BAR.
Built in safety controls on the starter panel protect the pump
module from overload and low water pressure conditions. Optional
built in sophisticated electrical devices such as thermostats,
humidistats and remote switches allow the pump module to cycle on
and off, activate the pump module at specified periods over a
24-Hour or 7 Day period etc.
Only
the highest quality industrial duty components are used in the
construction of a Piian Pump Module Package.
The pump module package is designed to operate in the toughest
dusty and dirty environments.
A water treatment device can be used to adjust hard water
characteristics and minimize nozzle maintenance.
Each system includes 10 and 5 micron filters to minimize servicing
requirements.
Pump Modules include CAT pumps and Baldor or WEG electric motors
which lead their industry in reliability, durability and
serviceability.
The pump module includes a stainless steel frame and
cover.
Each
pump module includes a fully featured built in NEC / IEC electrical
approved starter panel.
Each Standard Pump Module includes a set of 10 and 5 micron inlet
water filters.
Industrial
Pump Module Packages
An industrial
rated high pressure pump module package is available for our
industrial customers. Each pump module is custom designed and
manufactured for each system. Piian industrial pump module packages
include as standard a wall mounted inlet water filter and treatment
assembly, an industrial high pressure pump module with control
equipment and a wall mounted electric starter panel. The high
pressure pump module package filters, treats, then pressurizes
water to 1000 PSI / 70BAR. Built in safety controls on the starter
panel protect the pump module from overload and low water pressure
conditions. Optional built in sophisticated electrical devices such
as thermostats, humidistats and remote switches allow the pump
module to cycle on and off, activate the pump module at specified
periods over a 24-Hour or 7 Day period etc. Each industrial pump
module package include freeze protection.
Only
the highest quality industrial duty components are used in the
construction of a Piian Pump Module Package.
The pump module package is designed to operate in the toughest
dusty and dirty environments.
Pump
Modules include CAT pumps and Baldor or WEG electric motors which
lead their industry in reliability, durability and
serviceability.
The pump module includes a stainless steel frame and
cover.
Each
package includes a fully featured wall mounted NEC / IEC electrical
approved starter panel.
High capacity triple water filtration is supplied with each
industrial pump module package.
An optional chemical injector is available.
Each industrial package includes as standard an air purge mechanism
to removes all moisture from the manifold lines and atomization
nozzles on each shut down to minimize nozzle maintenance and for
freeze protection.
A water treatment device is used to adjust hard water
characteristics and minimize nozzle
maintenance.