Click here to
download the Miracle Mist Brochure
Atomization Nozzle and Tube Assembly Detail &
Specification
Heavy
Wall Nylon Tubing Manifold, 1000 PSI Operating Pressure
Atomization Nozzle Assemblies use Push On Style Fittings, 1000PSI
Operating Pressure.
Manifold tubing is cut to length and the nozzle assemblies are
pushed on as required on site.
Atomization nozzles produce 10-micron fog droplets.
An antidrip mechanism prevents dripping and water damage.
The flow rate of each nozzle is 0.022 GPM at 1000 PSI.
Each nozzle has a 0.008" orifice.
Manifold
Tubing and Fitting Layout Details &
Specification
Numerous
Push On Style Fittings are available to create a variety of
manifold Layouts as illustrated.
Manifold Tubing can be secured in position using hose clamps or
alternatively the entire manifold assembly can be suspended on
cables.
Pump
Module Detail & Specification
800
to 1200 PSI operating pressure to create 10 micron sized fluid
droplets.
Inlet water solenoid valve to shut off water supply to pump when
not in operation.
5 Micron Inlet Water Filters.
CAT triplex plunger pump head 2000 PSI pressure rated with large
oil capacity.
Outlet water pressure gauge to record water pressure at pump module
at all times.
Pressure regulator, adjusts pressure from 0 to 1200 PSI
Thermally protected by pass loop. cools & circulates unused
pressurized water, drains overheated water if required
GE motor, continuous duty rated.
Fault Lights for power supply, system operation, motor overload and
low inlet water pressure
Liquid tight conduit and cord connections