cooling-flexi fog system.pdf">Click here to download
the Flexi Fog Brochure
All Piian Flexi Fog Systems are Supplies as a
kit.
•
A
pump module package with starter panel and water
filters.
•
Manifold tubing
plus tubing clamps and anchors.
•
Assorted
manifold connector fittings.
•
Atomizing nozzle
assemblies.
Flexible
Atomization Line
All
systems have 1000 PSI operating pressure produce 10 micron
droplets.
UV Resistant - no shrinkage, elongation or brittleness.
Kit includes everything required to complete an installation.
Designed to operate in the toughest environments
System uses only proven industrial quality components.
Atomization nozzles produce 10-micron fog droplets.
Each nozzle is 360o
adjustable.
An antidrip mechanism prevents dripping and water damage.
The flow rate of each nozzle is 0.022 GPM at 1000 PSI.
Each nozzle has a 0.008" orifice.
The
tubing supplied as part of each kit is simply cut to length and the
nozzle assembly is simply pushed onto the tube.
Only a tube cutter is required, assembling the nozzle is fast and
simple.
360º adjustable nozzle orientation is available.
Nozzle clusters include 6 nozzles
arranged in radial fashion.
Clusters are used for spot treatment.
Automatic Drain Valve drains residual fluid from system upon shut
down.
Pump
Modules
Piian Systems
offer two pump module specifications for the Flexi Fog system.
Standard pump modules are a lower cost, lower specification
alternative to a full industrial pump module package. They include
a 1000PSI high pressure pump, 10 and 5 micron water filters and a
built in electric starter panel. The high pressure pump module
filters then pressurizes water to 1000 PSI / 70BAR. Built in safety
controls on the starter panel protect the pump module from overload
and low water pressure conditions. Optional built in sophisticated
electrical devices such as thermostats, humidistats and remote
switches allow the pump module to cycle on and off, activate the
pump module at specified periods over a 24-Hour or 7 Day period
etc.
Only
the highest quality industrial duty components are used in the
construction of a Piian Pump Module Package.
The pump module package is designed to operate in the toughest
dusty and dirty environments.
A water treatment device can be used to adjust hard water
characteristics and minimize nozzle maintenance.
Each system includes 10 and 5 micron filters to minimize servicing
requirements.
Pump Modules include CAT pumps and Baldor or WEG electric motors
which lead their industry in reliability, durability and
serviceability.
The pump module includes a stainless steel frame and
cover.
Each pump module
includes a fully featured built in NEC / IEC electrical approved
starter panel.
Each Standard Pump Module includes a set of 10 and 5 micron inlet
water filters.